Which statement best describes an outdoor RF point-to-point antenna deployment?
A. Both antennas must be vertically polarized.
B. Both antennas must be horizontally polarized.
C. There should be a 90 degree difference between antennas for best results.
D. There should be a 180 degree difference between antennas for best results.
E. It does not matter so long as both antennas have matching polarization.
Which two issues can commonly create problems with positioning an antenna on a rooftop? (Choose two.)
A. Reflection from the rooftop
B. Absorption from the rooftop
C. Fresnel obstruction from rooftop edge
D. Lack of PoE for AP
E. Other antennas
Which item is the most common limiting factor in an outdoor coverage for mesh deployment?
A. 5GHz MAP to RAP backhaul
B. 2.4GHz MAP to RAP backhaul
C. 2.4GHz MAP access
D. 2.4GHz client
When surveying and deploying a mesh network, considerations need to be made for the actual path selection process made by AWPP for any MAP to reach the final RAP. Which two factors are used by AWPP in path selection calculation? (Choose two.)
D. Hop count
E. Interface radio power setting
F. Interface bandwidth
G. Interface load
What is the optimal distance between APs for location services without taking into consideration the physical environment?
A. 90 to 120 feet
B. 80 to 100 feet
C. 40 to 70 feet
D. 10 to 25 feet
E. 5 to 20 feet
When ordering the software licenses for a Cisco WLAN project, what are the minimum software packages required if the location requires 390 lightweight APs, 100 of which will be used for location services, and a Cisco 3310 MSE?
A. One 500 AP single server license package for the WCS and one 3000 device license for the MSE.
B. One 1000 AP single server license package for the WCS and one 500 device license for the MSE.
C. One 1000 AP single server license package for the WCS and one 3000 device license for the MSE.
D. One 500 AP single server license package for the WCS and one 1000 device license for the MSE.
E. One 1000 AP single server license package for the WCS and one 2000 device license for the MSE.
Which two factors influence the density of APs in a data-only WLAN environment? (Choose two.)
A. Channel reuse and WLAN bandwidth
B. The type of controller chosen.
C. The defined coverage area and customer needs.
D. The number of clients that will roam through the facility.
E. The number of APs dedicated to voice services.
An outdoor mesh network is being designed with one RAP and then a single RF hop to MAP1 and another single RF hop from MAP1 to MAP2 to extend coverage. Given that the initial RF backhaul at the RAP is operating at 24 Mb/s, what is the expected RF backhaul bandwidth at MAP2?
A. 24 Mb/s
B. 20 Mb/s
C. 14 Mb/s
D. 7 Mb/s
E. 3 Mb/s
F. 1 Mb/s
When designing and deploying an outdoor mesh network, what is the appropriate RF cell overlap?
A. 10 percent
B. 15 percent
C. 20 percent
D. 25 percent
E. Application dependent
What is the result if a client radio is incapable of supporting all the 5 GHz channels you have deployed in the controller or APs?
A. You may only be able to deploy 20 MHz-wide channels.
B. This may result in the client having to roam more frequently to find a channel it supports.
C. This may result in coverage holes in the network.
D. You may only be able to deploy 40 MHz-wide channels.
Update Passleader Cisco 642-732 Practice Tests PDF Dumps Free Download